Gabatarwa: 

Ya dace da: kayan aikin bayan-latsawa, zane-zane, kwali (marufi), lambobin mota, lambobi na ƙasa, bangarorin nuna haske na baya, tallan banner da kayan nunin taga, lambobin tebur ....

Yi amfani da kayan aiki; dace da rashin barci kowane nau'in fim mai lamin sanyi (fim mai tallafi, babu fim na baya fim na farko polymer sanyi laminating fim, da sauransu).

Laminating lokaci daya, yankan kayan aiki masu tsawo, tare da gyara da kuma aikin gyara-daidai.

Sandar kayan aiki baya buƙatar daidaitawa, kuma an kulle ta atomatik bayan juyawa (patent).

Pneumatic dagawa roba nadi ne dace da sauri, da kuma matsa lamba ne daidaita.

Tsarin ƙirar makullin sarrafa saurin sauri na gaba da na baya yana sa amfani ya zama ɗan adam (patent).

Halaye

1. Standard 3 tungsten karfe wukake, za'a iya kebanta adadin yankan wuƙaƙe

2. An saka kayan hoto a jikin injin kuma an dakatar da na'urar nan take.

3.400w daidaitaccen motsi na motsa jiki.

4. diamita 130mm anti-m silicone nadi

5. atomatik lamination; Mai pneumatic don matsa lamba

6. Ba a tuntuɓar tsarin kula da zafin jiki na infrared

7, Tsarin tsagaita tsaka-tsaka mai daidaitaccen tsari.

8, tare da kwararren anti-tsaye a na'urar

Bodyayan yanki ɗaya don tabbatar da shaft ɗin kayan abu da kuma tattara mashaya a cikin babu sauyawa lokacin laminate. Daya gefen hannun crank dagawa tsarin, ba sa bukatar iska kwampreso;

Tallafin fim, don tallafawa hoto, don tattara takaddun layi, yana ɗaukar sabon salo na allo wanda ke tallafawa abin nadi, wanda ke da sauƙin haɗawa / kwancewa kuma ana iya amfani dashi a musayar.

• hade kwamitin kula da kewaya, Mai sauqi da sauqi don amfani da kwamiti mai sarrafawa, mai sauƙin samar da finafinan ɗaukar hoto.

• 130mm, inci 5.1 inci mafi girma mai ingancin siliki don mafi kyawun ingancin sarrafa laminating.

• Forward da kuma juya shugabanci iko

• E-tasha da hoton hoto da aka sanya don aminci

• Dukansu yanayin sauya feda na atomatik da ƙafa

• Castor mai nauyi tare da birki

• Sanye take da abun yanka

• Gwanin mai lamin sama mai zafi zuwa 60 C.

• Gudanar da sauya ƙafa don aiki kyauta.

• Mai saurin saurin laminating har zuwa 49ft / minti.

 

Musammantawa: 

Nisan Fima Mafi Girma: 1630MM (64 ")

Matsakaicin Fim Mafi Girma: 28MM (1 ")

Laminating Speed: 15M / Min

Yankin Daidaita Yanayin Zafin jiki: 80℃ (176℉ )

Hanyar lerawan Rubber: Pneumatic

Cigaba da Amfani da Workingarfin Aiki: 0.5-0.7 KW / H

Inimar Input da aka Daraja: 1400W

Atedarfin Input da aka Gina: 110V Singlearfin Rage Na Biyu, 50HZ

Nauyin Na'ura: 170KG (374LB)

Girman Inji: 198X63X126CM (77 "X24" X49 ")

Tsarin sarrafawa: Zhifu 6th Generation

Hanyar Sandar Kayan aiki: Alloy Alloy Sanda mai Selfara Kai

220X86X75CM (86 "X33" X29 ")